How do you apply vinyl decals?
DECAL APPLICATION INSTRUCTIONS
1. Clean the area where the decals will be applied with a soft cloth dampened with alcohol. This will remove any wax, oil or dust particles that will prevent the decal from sticking. After wiping the area with alcohol it is best to wipe the surface with a cloth dampened with clean water and let dry.
2. Carefully peel the tape and decal away from the paper backing. Hold the decal in position and stick the top or one side holding the other side up away from the surface. Rub the entire area beginning at the top or side that is on the surface and rub firmly from one side to the other using your fingertips, squeegee, or the sharp edge of a credit card. The decals have a pressure sensitive adhesive the harder you rub the harder it sticks.
3. Remove the application tape by pulling gently in a downward position. If a part of the decal starts to come up away from the surface rub it back down while the tape is still on, then proceed to remove the tape.